Product List
Power Modules
Universal Color Line
Gold-plated tube soc
Power Plate Series
Pulse charger
Heat iron core
Gold-plated copper w
power bank
 Contact us
Shijiazhuang Huamei Electronics Factory
Address:2-217 Xinhua Business Plaza,Shijiazhuang,Hebei
Tel:0311-87026811 13503293323
Fax:0311-87874589
QQ:429745762
Technical Advisory:13722787178
Zip Code:050000
Mail:mokuai@126.com
Products Home >> Products
Huamei UniversaI Power Supply Module HM-619
Published:2011/9/2 11:22:53 Hit:17823
 

        
                                  Huamei UniversaI Power Supply Module HM-619
  This module has noly three leading wires and can be connected to the original machine's circuit in the simplest way. the protective functions it has include the protections against over-voltage,over-current,short-circuit,and erroneous connection of leading wires,it can be installed so conveniently and quickly that use of just two wires (the black and red wires) of this module can achieve this purpose for most machines. Ex-trenely strong loading capacity and more stable and reliable ysage can bring great convenience to daily maintenance and application of this prosuct.lt not only can be uses to maintain and substitute various color TV's switch power supply circuit,but also is applicable for various large-size color TVs.Moreover,lt can be used in the switch power supplies of VCD.DVD.satellite receiver,etc.Now the case of color TV is used to describe its usage.
 
  1.Dismantle the switching tube or thick-film block of original power supply,and fix this module solidly on the original radiating rib;
  2.Connect the red wire to the original switching tube's welding point at pole C(field effect transistor is at pole D)or to the corresponding power tube's welding point at pole C inside the thick-film block;
  3.Connect the black wire to the original switching tube's welding point at pole E(field effect transistor is at pole S) or to the corresponding power tube's welding point at pole E (black wires in parallel power supply circuits can bedirectly connected to hot ground not isolated from municipal power grid).
  4.Cut off the line load and connect to it a 100Wbulb and turn on the machine.Then regulate the module's self-con-tained potential device to make the output voltage meet the required value.Output voltages of other windings can meet the requirements automatically.(When leav-ing factory,the module has already had its-output voltage regulated to the lowest value.For application on sifferent products,the lowest output voltage are different,for exanple, the lowest output for TV's ranges from 20V to 70V and the lowest output for video players is about 4V).During debugging,the voltage and poten-tial device must be regulated by plastic-handled small screwdriver;
  5.The green wire is for  remote-controlled switch-of. Conduction to hot qround can switch off the output.The machine that adopts light-coupled switch-off is connected to light-coupled pole C,light-coupled pole E is connected to hot ground,and other connection wires are all cut off from light-coupled pole C.if there are voltage-stabilizing components on the sides of light couoing,the componentsshould be dismantled;however the control components for switch-off
should be retained.(For those machines that have two light couplings,C and E of the two light couplings should be parallelized for operatio);for the series power supplies that use standby tubes,the green wire should be connected to pole C of standby tube and other components connected to pole C should all be cut off;
  6. The green wire is also used for precise voltage regulation.The problem of inages changing with sounds that might happen after module is loaded can be solved by restoring the original machine's voltage-stabiliz-ing components and by regulating and controlling the green wire through light coupling. In this way,the purpose of precise voltage regulation can be achieved.For utilizing the original machine's voltage-stabilizing cirvuit,output voltage of this module must be regulated up by about 20 V through dummy load;then the original machine'svoltage-voltage can be lowered to the required value due to being subject to the original voltage-stabilizing control,and therefore,the effect of voltage stabilizing of the module can be the same as that of the original machine.Failure to lower or abnormal lowering of the output voltages or the machines that are connected to the original machine's voltage-stabilizing circuit can indicate problems of the original voltage-stabilizing circuit.
  7.If disturbances and noises occur after installation,please remove other components than are connected to pole C of the original switching tube, and attach the absorption circuit that is composed of resistance R1(33Ω-100Ω/5W) and capacitance C1 (470P-1000P-2000P/1KV-2KV). For whistling sounds occurring to series power supply,please dismantle the capacitance parallelized with the original fly-wheel diode;if the whistling sounds continue,please ddismantle all the apaci-tances that are connectedto the switching tube's pole C;
  8.For the phenomena of failure to start up abnormal voltage,and automatic protection,please check whether the primary and secondary commutation diodes,filter capacitor,and corresponding loads are in shout circuit.If green wire exists,it should be cut off first to ascertain whether the failure to start up is caused by actions lf the remote-controlled switch-off circuit or by damage to this circuit.For series power suppply,whether the fly-wheel diode is in shout circuit or open circuit should also be ascertained;
  9.The absorption circuit in figure 3 is relatively applicable for voltagereduced machines,and among them,the resistance R is 33K-51K/3W-5W,the capacitance C is 1000P-2200P/630V-2KV,and D is the quick diode.
  Additionally,it should be narrated here that for partial machine types, their switch transformers are not compatible with module and this might result in the failure of ortput voltage to meet the original machines tequirements and too loud noises to use this module.nevertheless,this module can be used in other products.For modules that have been used before,the voltage must be regulated to the lowest output state before intallation.lest excessively high voltatge might damage the components when the module is used in other products.The range of this module's output voltage is wide and it is normal when voltage is not regulatted to the required values,the output voltage is not stable or whistling sounds happen.
              Shijiazhuang Gaoxin District Huamei Electronic Component Factory

 
Home】 【Close
 
 
   
Copy right ©2011 Shijiazhuang Huamei Electronics Factory
Tel:0311-87026811 13503293323 Fax:0311-87874589 QQ:429745762 Technical Advisory:13722787178
Zip Code:050000 Address:2-217 Xinhua Business Plaza,Shijiazhuang,Hebei Mail:mokuai@126.com
免责声明:本站部分图片来源网络,版权归原创作者或原公司所有,如果您认为我们侵犯了您的版权,请告知,我们立即删除!